Subject: Re: turbo lock
From: Rosette Modiri <[email-masked]>
To: Mohd <[email-masked]>
Date: Sun, 19 Jan 2020 07:01:17 -0700 (MST)

Locking your Bike Lock 

Step 1. Press and hold the release button. 
Step 2. Inserting the chain plug into the lock hole, then release the button. The plug will click 
into place. 
Step 3. Press the lock button ‘ ’. 
You must press the lock button ‘ ’ before the keypad goes out; otherwise, the lock isn’t secured. 
If the keypad turns off before you can complete all three steps, wake the keypad by pressing any 
key. Then press the lock button ‘ ’. 
Test whether the TL-400KB L has successfully locked by pressing the release button and 
checking if the chain plug disengages and/or can be pulled out. 
It’s best practice to use the lock button ‘ ’ or unlock button ‘ ’ to wake up the keypad; 
however, pressing any key once will wake up the keypad. 

or 

Second instructions: 

Attach the U-lock or chain around the rear wheel, the frame and the bike rack as above. Then push one end of the cable through the front wheel, pass one loop through the other loop and secure the first loop to the main lock. 

From: "Mohd" <[email-masked]> 
To: "Rosette Modiri" <[email-masked]> 
Sent: Friday, 17 January, 2020 01:23:36 
Subject: turbo lock 

CASE1424931 - how to use turbo lock with the scooter that it doesn't get slip away?