Subject: Fwd: tempalte for recalibrating
From: Saifullah Kar <[email-masked]>
To: Swagtron <[email-masked]>
Date: Thu, 26 Dec 2019 06:03:20 -0700 (MST)

From: "Saifullah Kar" <[email-masked]> 
To: "Gaurav Gupta" <[email-masked]>, "Aastha Dutta" <[email-masked]>, "Nikhil Mittal" <[email-masked]> 
Sent: Tuesday, December 24, 2019 5:28:13 PM 
Subject: tempalte for recalibrating 

TEMPLATE FOR RECALIBRATING AND FILLING RMA. 
Thanks for contacting us. We are sorry for the inconvenience. 

Please follow these steps: 

Hoverboard Recalibration 

    1. Power your Swagtron OFF 
    2. Rotate the Swagtron until both wheel bases are level to the ground. We recommend using a level or a level app for best results. 
    3. While the Swagtron remains level, hold the POWER button down to turn on the unit and keep holding the button down. 
    4. Wait an additional 3 seconds and you will hear a single beep. Release the POWER button and the front LEDs will begin flashing. (Note: T580 will not beep) 
    5. Press the POWER button again to turn the Swagtron OFF. 
    6. Once again, press the POWER button to turn your calibrated Swagtron unit ON. 

Hoverboard Reset 
Note: This is only effective when unit is calibrated. 

    1. Turn the Swagtron OFF. 
    2. Hold down the power button for 15 seconds. During this time, the unit will turn on and then the System Status indicator light will blink. 
    3. After releasing the power button, the status light will continue to blink, then turn the unit off and back on again. 

If the problem still persists, please fill out this form, [ https://swagtron.com/swagtron-return-rma-form/ | https://swagtron.com/swagtron-return-rma-form/ ] . Beside mentioning the problem also mention in the problem description box that you have already tried recalibrating it.