Subject: EPOS TeleLab Firewall - Power state - How to check if the firewall is powered on.
From: "Carsten Foss (CRFS)" <[email-masked]>
To: Ashish Dabral <[email-masked]>, Bhavi Neelakanth <[email-masked]>, Vinod Radhakrishna <[email-masked]>, "Ross Martowski (ROMR)" <[email-masked]>, "Christopher Kurek (CKUR)" <[email-masked]>
Cc: "Carsten Foss (CRFS)" <[email-masked]>
Date: Tue, 16 Nov 2021 09:11:43 +0000

It has come to my attention , that the firewall Power state can be confusing.
As the Network LED's will be turned on if there is an active network cable in the plugs. EVEN if the firewall is Powered DOWN

The only way to verify that the firewall is powered up , is to look at the Green Power "light bulb" LED , that has to be lit and showing green.

If it is NOT , please press the "round" power button (1 sec) on the opposite side of the network plugs.

I have configured in the BIOS , that the firewall should turn on , when power is applied.
But it seems that in some cases it misses that config setting.

So please verify that the green power led is lit , if you experience problems.

Attached is the new install guide, that now includes how to verify that the firewall is powered on.

Venlig hilsen / Best regards
Carsten Foss (CRFS)
Systemadministrator, Strategic Alliances
+45 7242 1704
EPOS Group A/S * Industriparken 27 * DK-2750 Ballerup * Denmark
<https://www.eposaudio.com/>
eposaudio.com<https://www.eposaudio.com/> * Follow us here
<https://www.facebook.com/eposenterprise>   <https://twitter.com/eposaudio>    <https://www.linkedin.com/company/eposaudio>    <https://www.instagram.com/eposaudio/>    <https://www.youtube.com/channel/UCKZSbHA_gj3OKwPnKa4cNaA>